Desulfurizer
086-411-84507677
Dalian haidu chemical co.,Ltd
Add: Jun’an Building, No.66.Xi’an Road,Shahekou District,Dalian City,Liaoning Prov,China
Email: haiduhuagong@sina.com
Position: Home > Products > Desulfurizer >

Z910 Sulfur Remover

Author: Admin Date: 2016-05-12

Introduction
  The product is a new and efficient sulfur remover catalyst with the composite metal compound as the main active component; mainly used for the refinery wastewater stripper ammonia refining system, the removal of hydrogen sulfide from gas ammonia at low temperature conditions. It can remove hydrogen chloridetoxic and hazardous substances. The agent has the following characteristics, such as high sulfur content, high-strength, water resistance, not compacted, not spontaneous combustion. It can be the substitution of activated charcoal and zinc oxide, hydrogen sulfide from disposable to less than 1 mg/m3

Main technical indexes of Z910

Quality standards Operating conditions and purification indexes
Exterior Brown strip Operating temperature,℃ -10~50
Specification, mm Φ(3~4)×(5~15) Operating pressure, Mpa Atmospheric pressure~3.0
Bulk density, g/ml 0.8~1.0 Velocity, h-1 ≤3000
Crushing strength, N/cm ≥110 Inlet H2S content, mg/m3 ≤1000
Maximum sulfur adsorption amount, %m/m ≥30 Exit H2S content, mg/m3 ≤1
Packing and attentions
Z910 is packed in hard paper drum, inner lined with plastic film. The net weight is 25kg per drum. Pay attention to moisture proof in storage, and ensure the catalyst not contacting with other chemical products. During transportation, loading and unloading, it is forbidden to bump and roll the drum to avoid catalyst breaking. Under airtight condition, the product can be stored for 3-5years, with its quality not deteriorated.