Dalian haidu chemical co.,Ltd
Add: Jun’an Building, No.66.Xi’an Road,Shahekou District,Dalian City,Liaoning Prov,China
Position: Home > Products > Desulfurizer >

Z802 Fine Sulfur Remover

Author: Admin Date: 2016-05-12

It is based on the quality of activated carbon as the carrier, adding a variety of co-catalyst after special treatment. It can regenerate and be widely used in coal gas, natural gas, coke oven gas, methanol synthesis gas, especially CO2 gas, the essence of the organic sulfur off the (FGD total sulfur content <0.1ppm). The Z802 catalysts do not need with oxygen feed gas, but have the better performance under aerobic circumstances.

Main technical indexes of Z802

Quality standards Operating conditions and purification indexes
Exterior Black strip Operating temperature,℃ 20~60
Specification, mm Φ3×(5~10) Operating pressure, Mpa 0.1~13.0
Bulk density, g/ml 0.6~0.7 Operating velocity, h-1 1000~2000
Specific surface area, m2/g ≥40 Bed height/diameter, L/D >3
Crushing strength, N/cm ≥60 Inlet H2S content, mg/m3 100
Maximum sulfur adsorption amount, %m/m ≥10 Exit H2S content, mg/m3 <0.1ppm
Packing and attentions
Z802 is packed in hard paper drum, inner lined with plastic film. The net weight is 25kg per drum. Pay attention to moisture proof in storage, and ensure the catalyst not contacting with other chemical products. During transportation, loading and unloading, it is forbidden to bump and roll the drum to avoid catalyst breaking. Under airtight condition, the product can be stored for 2-3 years, with its quality not deteriorated.